Características
Configurações
They can be manufactured with double gearing (AGD), single gearing (AGS) or two rigid hubs. See special versions.
GEAR COUPLINGS AGD
They are manufactured with triple curved teeth, resulting in superior service life, as the stress is shifted to the center of the teeth during transmission.
Accommodate radial and angular misalignments, protecting equipment.
They are manufactured in accordance with the AGMA 9008 B00 standard (revision of 516.01), having interchangeability with couplings that follow this standard.
Proper lubrication is essential to maximize service life. A maximum interval of 6 months is recommended. Simply insert the grease into the hole in one of the toothed caps until the excess overflows. Then insert plugs of toothed covers.
Características
Configurações
They can be manufactured with double gearing (AGD), single gearing (AGS) or two rigid hubs. See special versions.
Model | Radial Alignment Tolerance - mm During Operation | Radial Alignment Tolerance - mm for installation | Angular Alignment Tolerance* for installation | Angular Alignment Tolerance* during operation | Screw Tightening Torque Nm | Number of Screws | Mass Kg | Amount of Grease Kg |
---|---|---|---|---|---|---|---|---|
AGD 10 | 0.6 | 0.15 | 0.5° | 2° | 28 | 6 | 4,4 | 0,03 |
AGD 15 | 0,8 | 0,2 | 0,5° | 2° | 28 | 8 | 9 | 0,06 |
AGD 20 | 1 | 0,25 | 0.5° | 2° | 97 | 6 | 15 | 0,17 |
AGD 25 | 1,2 | 0,3 | 0,5° | 2° | 132 | 6 | 27 | 0,23 |
AGD 30 | 1,4 | 0,35 | 0,5° | 2° | 132 | 8 | 40 | 0,34 |
AGD 35 | 1,7 | 0,425 | 0,5° | 2° | 244 | 8 | 65 | 0,45 |
AGD 40 | 2 | 0,5 | 0,5° | 2° | 244 | 8 | 96 | 0,79 |
AGD 45 | 2,1 | 0,525 | 0,5° | 2° | 244 | 10 | 131 | 1,08 |
AGD 50 | 2,6 | 0,625 | 0,5° | 2° | 477 | 8 | 186 | 1,89 |
AGD 55 | 2,9 | 0,725 | 0,5° | 2° | 477 | 14 | 247 | 1,93 |
AGD 60 | 3,2 | 0,8 | 0,5° | 2° | 477 | 14 | 299 | 3,46 |
AGD 70 | 3,7 | 0,925 | 0,5° | 2° | 576 | 16 | 473 | 6,33 |
Model | Torque Nominal Nm | Rotation maximum rpm | Moment of inertia kgm2 | Hole Minimum (øD4) | Hole Maximum (øD3) | D5 | L1 | L3 | L4 | C | øB | øD2 | L2 | G | G1 | G2 | M1 | M2 | M3 | K1 | K2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AGD 10 | 1300 | 8000 | 0,005 | 14 | 52 | 116 | 89 | 96,5 | 104 | 43 | 69 | 84 | 40 | 3 | 10,5 | 18 | 4,5 | 12 | 27 | 12 | 19,5 |
AGD 15 | 2900 | 6500 | 0,019 | 22 | 65 | 152 | 102 | 112 | 122 | 49,5 | 86 | 105 | 46,5 | 3 | 13 | 23 | 4,5 | 14,5 | 31 | 13 | 23 |
AGD 20 | 5100 | 5600 | 0,041 | 27 | 80 | 178 | 127 | 146 | 165 | 62 | 105 | 127 | 59 | 3 | 22 | 41 | 4,5 | 23,5 | 42 | 17 | 36 |
AGD 25 | 10000 | 5000 | 0,105 | 32 | 98 | 213 | 159 | 186 | 213 | 77 | 131 | 155 | 75 | 5 | 32 | 59 | 4,5 | 31,5 | 54 | 20 | 47 |
AGD 30 | 16000 | 4400 | 0,195 | 42 | 115 | 240 | 187 | 220 | 253 | 91 | 152 | 181 | 89 | 5 | 38 | 71 | 4,5 | 37,5 | 64 | 23 | 56 |
AGD 35 | 22100 | 3900 | 0,454 | 47 | 135 | 279 | 219 | 248 | 277 | 106,5 | 178 | 211 | 105 | 6 | 35 | 64 | 4,5 | 33,5 | 71 | 32 | 61 |
AGD 40 | 32100 | 3600 | 0,86 | 47 | 160 | 318 | 247 | 285 | 323 | 120,5 | 210 | 250 | 118,5 | 6 | 44 | 82 | 5 | 43 | 82 | 34 | 72 |
AGD 45 | 45100 | 3200 | 1,39 | 52 | 180 | 346 | 278 | 327 | 376 | 135 | 235 | 274 | 134 | 8 | 57 | 106 | 5 | 54 | 96 | 42 | 91 |
AGD 50 | 62100 | 2900 | 2,53 | 72 | 195 | 389 | 314 | 371 | 428 | 153 | 254 | 306 | 152 | 8 | 65 | 122 | 5 | 62 | 109 | 42 | 99 |
AGD 55 | 84000 | 2650 | 3,83 | 72 | 215 | 425 | 344 | 412 | 480 | 168 | 279 | 334 | 167 | 8 | 76 | 144 | 5 | 73 | 122 | 45 | 113 |
AGD 60 | 115100 | 2450 | 5,21 | 77 | 235 | 457 | 384 | 461 | 538 | 188 | 305 | 366 | 186 | 8 | 85 | 162 | 6 | 83 | 136 | 60 | 137 |
AGD 70 | 174100 | 2150 | 11 | 92 | 280 | 527 | 452 | 553 | 654 | 221 | 356 | 425 | 219 | 10 | 111 | 212 | 7 | 108 | 165 | 72 | 173 |
Modelo | Intervalo - rpm |
---|---|
AGD10 | 0 - 1030 |
AGD15 | 0 - 700 |
AGD20 | 0 - 550 |
AGD25 | 0 - 450 |
AGD30 | 0 - 400 |
AGD35 | 0 - 350 |
AGD40 | 0 - 280 |
AGD45 | 0 - 250 |
AGD50 | 0 - 220 |
AGD55 | 0 - 200 |
AGD60 | 0 - 180 |
AGD70 | 0 - 150 |
Dimensione o seu acoplamento
Insira seus dados e informações técnicas para descobrir qual acoplamento ideal para o seu equipamento: