SW Elastic Coupling

Check out the main characteristics of the SW elastic coupling:

• Simple Maintenance: Regardless of the distance between shaft ends, it is not necessary to move the equipment to replace the elastic element. It only has 3 or 5 screws to fix the metal cover, on all models.

• Easy Inspection: It is necessary to remove the metal cover to inspect the elastic element. It is not necessary to move the machines away to check the condition of the elastic element.

• No Lubrication: They operate without the need for lubrication, minimizing maintenance.

• Total Security: The metal cover is a monobloc piece made of steel. To obtain greater durability, the steel cover has anti-corrosion protection.

• Absorbs Misalignments and Vibrations

• Application: Suitable for torque ranges between 37 and 12,350 Nm and axles of up to 120 mm. Operates at temperatures of up to 95ºC (PU) and 121ºC (HTrans).

SW elastic coupling installation

1. Position the metal cover and install the two metal hubs on the axles, aligning them.
2. Install the elastic element, single (sizes 95 to 225) or elastic inserts (226 to 350).
3. Thirdly, place the metal cover on top, then tighten only 3 or 5 screws radially (SW 095 to SW 226) or axially (SW 276 to SW 350).